If you want to make the bearings more smooth, there are a few things

If you want to make the bearings more smooth, there are a few things

1.There is no need to say that ceramic balls have a lot of advantages over low torque, mainly because the ceramic is harder, just like a flat tire, and the rolling resistance is smaller.
2. Select the appropriate lubricating oil, like “foot” oil slipped quickly, of course, in general oil to loose a little, not too thick and not too much, of course, also have to add, or after a long time will cause damage to the channel. If you’re using grease, it’s going to be a lot worse, and the thickening agent in it is too resistant.
Choose small bearing, bearing 606 is certainly better than the 608 and 188 bearing, because the bearing is small and the inner contact area is smaller. But it shouldn’t be too small. If you take a grain of grain size, you don’t have to be able to handle it.
4. All metal estimates and alloy steel, because of the bearing just easy to rust, if in order to turn for long or don’t use metal, if in order to have a component that can also choose a metal.
5.The holding frame in the bearing should be made of nylon, and the metal friction factor will be greater.

finger spinner image 1

                            finger spinner image 1

Prev American talent built the iPhone's finger spinner
Next Ceramic bearing or Metal bearing, which is better?

0 Comments

No Comments Yet!

You can be first to comment this post!

Leave a Comment